Ortal Clear TS Series

GREAT FIRE DESIGN IS AN IMMERSIVE EXPERIENCE.

The choice is clear when it comes to choosing your next three-sided, direct-vent gas fireplace - the Clear TS Series from Ortal features a completely frameless design + panoramic view of the flames. "Panorama-style" describes the unique, 270 degree viewing experience featured in this fireplace line.

HEAT BARRIER "COOL WALL" TECHNOLOGY.

Ortal fireplaces are distinctive in the Canadian market because they have moved beyond the “clean face” trim typical of direct-vent gas fireplaces available today, to adopt a truly frameless design. Eliminating the metal trim that typically frames direct-vent gas fireplaces enables the Ortal firebox to sit slightly recessed when installed (by 1-inch). This recess creates a chase above the firebox that naturally draws heat that radiates from the fireplace, and redirects it up and out of convection grills installed above or adjacent to the fireplace, or through a reveal incorporated into the fireplace wall structure.

This air re-direct serves to reduce the amount of heat that would typically accumulate on the wall above your fireplace, instead forcing the heat to circulate efficiently throughout the room. This special design allows you to hang your artwork or television directly above the fireplace without risking any heat damage.This air re-direct serves to reduce the amount of heat that would typically accumulate on the wall above your fireplace, instead forcing the heat to circulate efficiently throughout the room. This special design allows you to hang your artwork or television directly above the fireplace without risking any heat damage.

CLEAR TS SERIES FIREPLACE FEATURES:

  • Beautiful, variegated flame pattern with 6-9” flame heights

  • Minimal 19-21" framing depth

  • Operated using a thermostatic remote control that allows the user to regulate flame size and heat output

  • Available with a safety barrier screen or fan- assisted double glass system that works to redistribute radiant heat emitted from the interior glass layer up through a chase and into the room, forcing more effective heat circulation. This system is proven to significantly reduce the temperature of the outer glass layer to less than 175 degrees fahrenheit, in compliance with industry standards

  • Firestone, fireglass and ceramic log/ceramic branch set options available for the interior firebox media

 

CLEAR TS SERIES FIREPLACE SPECIFICATIONS:


CLEAR 40H70 TS

Required opening: 25-2/7" w x 41-2/5" h x 18-4/8" d

Fire viewing: 15-2/3" w x 27-3/5" h x 11-8/9" d
Max. square footage heated: 473 ft. sq. (23,670 BTUs/h.)


CLEAR 70 TS

Required opening: 36-3/5" w x 33-3/5" h x 20-3/5" d

Fire viewing: 27-1/5" w x 18-8/9" h x 14-3/5" d
Max. square footage heated: 582 ft. sq. (29,100 BTUs/h.)


CLEAR 110 TS

Required opening: 51-9/10" w x 31-2/7" h x 21" d

Fire viewing: 42-1/2" w x 15-2/3" h x 14-3/5" d
Max. square footage heated: 743 ft. sq. (37,167 BTUs/h.)


CLEAR 130 TS

Required opening: 58-3/5" w x 31-2/7" h x 21" d

Fire viewing: 49-1/5" w x 15-2/3" h x 14-2/3" d
Max. square footage heated: 743 ft. sq. (37,167 BTUs/h.)


CLEAR 150 TS

Required opening: 68-1/2" w x 31-1/5" h x 21" d

Fire viewing: 59-1/9" w x 15-2/3" h x 14-2/3" d
Max. square footage heated: 874 ft. sq. (43,715 BTUs/h.)


CLEAR 170 TS

Required opening: 76-2/7" w x 31-1/5" h x 21" d

Fire viewing: 66-9/10" w x 15-2/3" h x 14-2/3" d
Max. square footage heated: 874 ft. sq. (43,715 BTUs/h.)


CLEAR 200 TS

Required opening: 85-4/5" w x 31-1/5" h x 21" d

Fire viewing: 76-2/5" w x 15-2/3" h x 14-2/3" d
Max. square footage heated: 1,025 ft. sq. (51,277 BTUs/h.)


* This is an approximate measure that may be affected by several variables.

** As per CSA regulations implemented in 2015, all fireplaces with a sealed glass front are installed with a safety screen if it has been determined that the glass surface temperature exceeds 172° F while the unit is fired.

 

A NEW FIREPLACE CONCEPT - FROM ISRAEL.

Ortal fireplaces are distinctive in the Canadian market because they have moved beyond the “clean face” trim typical of direct-vent gas fireplaces available today to adopt a truly frameless design. Over thirty years of experience in manufacturing fireplaces has given Ortal the insight to create fireplaces that are durable and reliable; and they continue to maintain their place as a design disrupter in the heating industry. The Fireplace Specialist and Ortal have enjoyed a 15 year partnership with aligned values of quality, end-to-end service and challenging the norm in fireplace design.